27.1 Overview
This chapter explains how to configure the ZyXEL Device's TR-069 and TR-064 auto-configuration
settings.
27.1.1 What You Can Do in this Chapter
• The TR-069 screen lets you configure the ZyXEL Device's TR-069 auto-configuration settings
(Section 27.2 on page
• The TR-064 screen lets you enable management via TR-064 on the ZyXEL Device
on page
247).
• Your ZyXEL Device can act as an SNMP agent, which allows a manager station to manage and
monitor the ZyXEL Device through the network. Use the SNMP Agent screen to configure
through which interface(s) and from which IP address(es) users can use SNMP to access the
ZyXEL Device.
27.2 The TR-069 Clients Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your ZyXEL Device, can be
managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending
Remote Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible
Markup Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the ZyXEL Device, modify settings, perform
firmware upgrades as well as monitor and diagnose the ZyXEL Device. You have to enable the
device to be managed by the ACS and specify the ACS IP address or domain name and username
and password.
P-873HNUP-51B User's Guide
C
HAPTER
Remote Management
245).
2 7
(Section 27.3
245