The More Ap Screen - ZyXEL Communications P873HNUP User Manual

The following table describes the labels in this screen.
Table 15 Wireless > General: More Secure: WPA(2)
LABEL
Security Level
Security Mode
Authentication Server
IP Address
Port Number
Shared Secret
more.../less
WPA Compatible
Encryption
Group Key Update
Timer
ReKey Method

7.3 The More AP Screen

This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the ZyXEL
Device.
Click Network Settings > Wireless > More AP. The following screen displays.
Figure 27 Network Settings > Wireless > More AP
P-873HNUP-51B User's Guide
DESCRIPTION
Select More Secure to enable WPA(2)-PSK data encryption.
Choose WPA or WPA2 from the drop-down list box.
Enter the IP address of the external authentication server in dotted decimal
notation.
Enter the port number of the external authentication server.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the ZyXEL Device.
The key must be the same on the external authentication server and your
ZyXEL Device. The key is not sent over the network.
Click more... to show more fields in this section. Click less to hide them.
This field is only available for WPA2. Select this if you want the ZyXEL Device to
support WPA and WPA2 simultaneously.
Select the encryption type (AES or TKIP+AES) for data encryption.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or AES.
The Group Key Update Timer is the rate at which the RADIUS server sends a
new group key out to all clients.
The ZyXEL Device can automatically disconnect a wireless station from the
wired network after a period of inactivity or after a certain number of packets
have been processed. The wireless station needs to enter the username and
password again before access to the wired network is allowed.
• Select TIME to have the ZyXEL Device automatically disconnects a wireless
station from the wired network after a period of inactivity.
• Select NONE if you do not want the connection between the ZyXEL Device
and a wireless station to time out.
Chapter 7 Wireless
95