Table of Contents
Advertisement
Click Broadband > DSL to display the following screen.
Figure 20 Broadband > DSL
The following table describes the labels in this screen.
Table 10 Broadband > DSL
LABEL
DSL Bonding
State
Multi-PHY
Current
Mode
Apply
Cancel
P-873HNUP-51B User's Guide
DESCRIPTION
Select Enable to use the DSL bonding and ADSL fallback features. Make sure
your ISP supports these functions.
This shows the current bonding mode the ZyXEL Device is using. You can
change it in the Mode field.
Select whether you want to use Auto Switch, VDSL Bonding, or ADSL
Bonding. If you select Auto Switch, the ZyXEL Device automatically switches
to ADSL bonding when the VDSL bonding is not available. The bonding
switches back to VSDL when it is re-established.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to exit this screen without saving.
Chapter 6 Broadband
81
Advertisement
Table of Contents
