Table of Contents
Advertisement
Chapter 14 Interface Group
Table 65 Interface Group Configuration (continued)
LABEL
Filter Criteria
WildCard Support
Remove
Apply
Cancel
14.2.2 Interface Grouping Criteria
Click the Add button in the Interface Grouping Configuration screen to open the following
screen.
Figure 88 Interface Grouping Criteria
The following table describes the fields in this screen.
Table 66 Interface Grouping Criteria
LABEL
Source MAC
Address
DHCP Option 60
Enable wildcard
on DHCP option
60 option
DHCP Option 61
IAID
192
DESCRIPTION
This shows the filtering criteria. The LAN interface on which the matched traffic
is received will belong to this group automatically.
This shows if wildcard on DHCP option 60 is enabled.
Click the Remove icon to delete this rule from the ZyXEL Device.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to exit this screen without saving.
DESCRIPTION
Enter the source MAC address of the packet.
Select this option and enter the Vendor Class Identifier (Option 60) of the
matched traffic, such as the type of the hardware or firmware.
Select this option to be able to use wildcards in the Vendor Class Identifier
configured for DHCP option 60.
Select this and enter the device identity of the matched traffic.
Enter the Identity Association Identifier (IAID) of the device, for example, the
WAN connection index number.
P-873HNUP-51B User's Guide
Advertisement
Table of Contents
