Table of Contents
Advertisement
9.1 Overview
The ZyXEL Device usually uses the default gateway to route outbound traffic from computers on the
LAN to the Internet. To have the ZyXEL Device send data to devices not reachable through the
default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the ZyXEL Device's LAN interface.
The ZyXEL Device routes most traffic from A to the Internet through the ZyXEL Device's default
gateway (R1). You create one static route to connect to services offered by your ISP behind router
R2. You create another static route to communicate with a separate network behind a router R3
connected to the LAN.
Figure 48 Example of Static Routing Topology
A
R3
P-873HNUP-51B User's Guide
LAN
WAN
C
H A PT ER
Static Routing
R1
R2
9
135
Advertisement
Table of Contents
