Table of Contents
Advertisement
The following table describes the fields in this screen.
Table 60 Network Settings > IGMP Setting > IGMP Filter > Add a new service
LABEL
Service Name
Maximum active
channels for STB
Maximum active
channels for Non-
STB
Group List
Add a group
Group
Modify
Apply
Cancel
13.3.3 IGMP Host Limitation Add
Use this screen to control a LAN host's access to an IGMP multicast service domain. Click Network
Settings > IGMP Setting > IGMP Filter > Add a new host limitation to open the following
screen.
Figure 82 Network Settings > IGMP Setting > IGMP Filter > Add a new host limitation
The following table describes the fields in this screen.
Table 61 Network Settings > IGMP Setting > IGMP Filter > Add a new host limitation
LABEL
Service
LAN Host
IGMP Enabled
P-873HNUP-51B User's Guide
DESCRIPTION
Specify a name to identify the IGMP service domain. You can enter up to 30
characters. You can use letters, numbers, hyphens (-) and underscores (_).
Spaces are not allowed.
Specify to how many of the service domain's IGMP channels a LAN STB device
is allowed to subscribe.
Specify to how many of the service domain's IGMP channels LAN devices other
than STBs are is allowed to subscribe.
Use this section to specify the multicast groups and subnet masks for this IGMP
service domain.
Click this to add a multicast group and subnet mask to this IGMP service
domain.
This column lists the multicast groups and subnet masks for this IGMP service
domain.
Click the Delete icon to delete the entry.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to exit this screen without saving.
DESCRIPTION
Specify the name of the IGMP multicast service domain to which you want to
block or allow access.
Select the IP address of one of the ZyXEL Device's LAN hosts.
Select whether or not the LAN device using the specified IP address is allowed
to use the IGMP multicast service domain.
Chapter 13 IGMP
185
Advertisement
Table of Contents
