The following tables summarize the ZyXEL Device's hardware and firmware features.
34.1 Hardware Specifications
Table 110 Hardware Specifications
Dimensions
Weight
Power Adaptor Output
Power Adaptor Input
RESET Button
WLAN/WPS Button
Antennas
Built-in Switch
DSL Port
Gigabit Ethernet WAN
Port
HomePNA Coaxial Port
USB Ports
Operation Temperature
Storage Temperature
Operation Humidity
Storage Humidity
P-873HNUP-51B User's Guide
C
HAPTER
Product Specifications
210 (L) x 154 (W) x 40 (H) mm (without external antenna)
495g (without external antenna)
12 V 1.5 A
100-240V AC, 50/60Hz
Restores factory defaults
If the wireless network is turned off, press the WLAN/WPS button on the
front of the ZyXEL Device for two seconds. Once the WLAN/WPS LED
turns green, the wireless network is active.
While the WLAN/WPS LED is green press the WLAN/WPS button for
five seconds and release it to enable WPS (Wi-Fi Protected Setup).
To turn off the wireless network, press the WLAN/WPS button on the
front of the ZyXEL Device for one to five seconds. The WLAN/WPS LED
turns off when the wireless network is off.
Two: One detachable external, 2dBi antenna and one internal, 2dBi
antenna.
Four auto-negotiating, auto MDI/MDI-X 10/100 Mbps RJ-45 Ethernet ports
One RJ-11 connector for DSL over POTS
One RJ-45 connector for GBE WAN
One port for HPNA v3.1 access, coax F type connector
One USB v2.0 port for file sharing
0º C ~ 40º C
-20º ~ 60º C
20% ~ 85% RH (non-condensing)
20% ~ 90% RH (non-condensing)
3 4
273