Before You Begin; The Broadband Screen - ZyXEL Communications EMG8726-B10A User Manual

Figure 24 Dual Stack Lite

6.1.3 Before You Begin

You need to know your Internet access settings such as encapsulation and WAN IP address. Get this
information from your ISP.

6.2 The Broadband Screen

Use this screen to change your EMG's Internet access settings. Click Network Setting > Broadband from
the menu. The summary table shows you the configured WAN services (connections) on the EMG.
Figure 25 Network Setting > Broadband
The following table describes the labels in this screen.
Table 11 Network Setting > Broadband
LABEL
Add New WAN
Interface
#
Name
Type
Mode
Encapsulation
802.1p
Chapter 6 Broadband
DESCRIPTION
Click this button to create a new connection.
This is the index number of the entry.
This is the service name of the connection.
This shows it is an Ethernet connection.
This shows whether the connection is in routing or bridge mode.
This is the method of encapsulation used by this connection.
This indicates the 802.1p priority level assigned to traffic sent through this connection. This
displays N/A when there is no priority level assigned.
EMG6726/8726-B10A User's Guide
67