Table of Contents
Advertisement
Table 62 Network Settings > IGMP Setting > IGMP ACL (continued)
LABEL
Multicast Address
Mask
Black List
Multicast Address
Multicast Address
Mask
Modify
Apply
Cancel
13.4.1 IGMP ACL Add
Use this screen to configure the multicast IP address of a multicast media channel to which you
want to block or allow access. Click Network Settings > IGMP Setting > IGMP ACL > Add a
new rule to open the following screen.
Figure 84 Network Settings > IGMP Setting > IGMP ACL > Add a new rule
The following table describes the fields in this screen.
Table 63 Network Settings > IGMP Setting > IGMP ACL > Add a new rule
LABEL
Multicast IP
Address
Multicast IP Mask
Type
Apply
Cancel
P-873HNUP-51B User's Guide
DESCRIPTION
This is the subnet mask of the multicast IP address.
These rules are for blocking access to specific multicast IP addresses.
This is the multicast IP address of a multicast media channel to which you want
to block access.
This is the subnet mask of the multicast IP address.
Click the Edit icon to change the entry.
Click the Delete icon to delete the entry.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Enter the multicast IP address of a multicast media channel to which you want
to block or allow access.
Enter the subnet mask of the multicast IP address.
Select Black List to have this entry block access to the specified multicast IP
address.
Select White List to have this entry allow access to the specified multicast IP
address.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to exit this screen without saving.
Chapter 13 IGMP
187
Advertisement
Table of Contents
