ZyXEL Communications ZyXEL Prestige P-870HN-51b Quick Start Manual
802.11n vdsl2 4-port gateway
Hide thumbs
Also See for ZyXEL Prestige P-870HN-51b:
- Support notes (124 pages) ,
- Quick start manual (14 pages) ,
- Specifications (2 pages)
Related Manuals for ZyXEL Communications ZyXEL Prestige P-870HN-51b
Summary of Contents for ZyXEL Communications ZyXEL Prestige P-870HN-51b
- Page 1 P-870HN-51b 802.11n VDSL2 4-port Gateway Firmware v1.00 Edition 1, 9/2009 DEFAULT LOGIN DETAILS IP Address: http://192.168.1.1 Username: admin Password: 1234 www.zyxel.com Copyright 2009 ZyXEL Communications Corporation...
- Page 2 Device Panels Power LED Ethernet LEDs 1-4 WLAN/WPS DSL LED Internet Antenna Power Switch Power Socket WPS/WLAN Button Reset Button Ethernet Ports 1-4 DSL Port...
- Page 3 Introduction The P-870HN-51b is a VDSL2 gateway that provides super high-speed Internet access. You can have multiple ADSL (ADSL, ADSL2, ADSL2+) connections or multiple VDSL (VDSL, VDSL2) connections over a telephone line. You cannot have ADSL and VDSL connections at the same time.
-
Page 4: Before You Begin
Before You Begin Make sure you have the following things before you set up your P- 870HN-51b. • Internet access - account information provided by your ISP, such as user name, password, and so on. • Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with JavaScript enabled. -
Page 5: Hardware Connections
Hardware Connections This section shows you how to set up your P-870HN-51b. ENGLISH... -
Page 6: Checking The Leds
1. Point the antenna up. 2. DSL: Use a telephone wire to connect this port to a telephone jack (or the DSL or MODEM jack on a splitter, if one is already installed). 3. ETHERNET 1-4: Use an Ethernet cable to connect a computer to this port for initial configuration and/or Internet access. -
Page 7: Initial Configuration
If none of the LED are on, check your connections. Make sure that you have the power adaptor connected to the P- 870HN-51b and plugged into an appropriate power source. Make sure the power source is turned on. Turn the P- 870HN-51b off, wait for a few seconds and turn it back on. -
Page 8: Internet Setup
2. Enter the admin user name admin and password 1234 (default). Click If the login screen does not display, make sure you allow web browser pop-up windows, JavaScripts and Java permissions. Your computer should also be set to get an IP address automatically from a DHCP server. -
Page 9: Wireless Setup
If you cannot access the Internet and the INTERNET LED is off, make sure you enter the correct information in the WAN screens. If you are using a new Internet account, contact your ISP to make sure it is active. If you are trying to access the Internet wirelessly, make sure the wireless and security settings in your wireless client are the same as the settings in the P-870HN-51b. - Page 10 Make sure your wireless security settings are compatible with your existing wireless devices. See the User's Guide for more information on wireless networks. Go to the WLAN Setup with WPS section if you do not want to use the wireless LAN screen to set up your wireless network.
- Page 11 WLAN Setup with WPS You can use Wi-Fi Protected Setup (WPS) to set up a secure wireless network and add wireless devices to your wireless network at the touch of a button. The other wireless devices must also support WPS. Look for the WPS/WLAN button on the rear panel of your device.
- Page 12 How to View a Product’s Certification(s) 1. Go to www.zyxel.com. 2. Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3. Select the certification you wish to view from this page.