Table of Contents
Advertisement
Chapter 4 Tutorials
You need to specify a static routing rule on the ZyXEL Device to specify R as the router in charge of
forwarding traffic to N2. In this case, the ZyXEL Device routes traffic from A to R and then R routes
the traffic to B.
N1
This tutorial uses the following example IP settings:
Table 4 IP Settings in this Tutorial
DEVICE / COMPUTER
The ZyXEL Device's WAN
The ZyXEL Device's LAN
A
R's N1
R's N2
B
To configure a static route to route traffic from N1 to N2:
Log into the ZyXEL Device's Web Configurator in advanced mode.
1
Click Advanced > Routing.
2
Click Add New Static Route Entry in the Static Route screen.
3
Configure the Static Route Setup screen using the following settings:
4
Select the Active check box. Enter the Route Name as R.
4a
Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
4b
56
A
IP ADDRESS
172.16.1.1
192.168.1.1
192.168.1.34
192.168.1.253
192.168.10.2
192.168.10.33
R
N2
B
P-873HNUP-51B User's Guide
Advertisement
Table of Contents
