Table of Contents
Advertisement
Chapter 34 Product Specifications
34.2 Firmware Specifications
Table 111 Firmware Specifications
Default IP Address
Default Subnet Mask
Default User Name
Default Password
DHCP Server IP Pool
Static Routes
Device Management
Wireless Functionality
(wireless devices only)
Firmware Upgrade
Configuration Backup &
Restoration
HomePNA (Home
Phoneline Networking
Alliance, also known as
HPNA) 3.1
Port Forwarding
DHCP (Dynamic Host
Configuration Protocol)
Dynamic DNS Support
IP Multicast
Time and Date
Logs
Universal Plug and Play
(UPnP)
QoS (Quality of Service) You can efficiently manage traffic on your network by reserving bandwidth
274
192.168.1.1
255.255.255.0 (24 bits)
admin
1234
192.168.1.2 to 192.168.1.254
16
Use the web configurator to easily configure the rich range of features on
the ZyXEL Device.
Allow the IEEE 802.11b, IEEE 802.11g and/or IEEE 802.11n wireless
clients to connect to the ZyXEL Device wirelessly. Enable wireless security
(WEP, WPA(2), WPA(2)-PSK) and/or MAC filtering to protect your wireless
network.
Download new firmware (when available) from the web site and use the
web configurator to put it on the ZyXEL Device.
Note: Only upload firmware for your specific model!
Make a copy of the ZyXEL Device's configuration. You can put it back on
the ZyXEL Device later if you decide to revert back to an earlier
configuration.
Extend your Internet connection to the coaxial outlets in your house. HPNA
is a home networking technology for carrying data over existing coaxial
cables and telephone wiring.
If you have a server (mail or web server for example) on your network,
you can use this feature to let people access it from the Internet.
Use this feature to have the ZyXEL Device assign IP addresses, an IP
default gateway and DNS servers to computers on your network. Your
device can also act as a surrogate DHCP server (DHCP Relay) where it
relays IP address assignment from the actual real DHCP server to the
clients.
With Dynamic DNS (Domain Name System) support, you can use a fixed
URL with a dynamic IP address. You must register for this service with a
Dynamic DNS service provider.
IP multicast is used to send traffic to a specific group of computers. The
ZyXEL Device supports versions 2 and 3 of IGMP (Internet Group
Management Protocol) used to join multicast groups (see RFC 2236).
Get the current time and date from an external server when you turn on
your ZyXEL Device. You can also set the time manually. These dates and
times are then used in logs.
Use logs for troubleshooting. You can send logs from the ZyXEL Device to
an external syslog server.
A UPnP-enabled device can dynamically join a network, obtain an IP
address and convey its capabilities to other devices on the network.
and giving priority to certain types of traffic and/or to particular
computers.
P-873HNUP-51B User's Guide
Advertisement
Table of Contents
