Chapter 11 Network Address Translation (NAT)
Table 43 Network Settings > NAT > Port Forwarding (continued)
LABEL
Server IP Address This is the server's IP address.
Modify
11.2.1 Add/Edit Port Forwarding
Click Add new rule in the Port Forwarding screen or click the Edit icon next to an existing rule to
open the following screen.
Figure 61 Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 44 Port Forwarding: Add/Edit
LABEL
Active
Service Name
WAN Interface
External Start
Port
162
DESCRIPTION
Click the Edit icon to edit this rule.
Click the Delete icon to delete an existing rule.
DESCRIPTION
Clear the check box to disable the rule. Select the check box to enable it.
This field is read-only in the Port Forwarding Configuration screen.
Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so
on).
This field is read-only in the Port Forwarding Edit screen.
Select the WAN interface through which the service is forwarded.
You must have already configured a WAN connection with NAT enabled.
Enter the original destination port for the packets.
To forward only one port, enter the port number again in the External End Port
field.
To forward a series of ports, enter the start port number here and the end port
number in the External End Port field.
P-873HNUP-51B User's Guide