The Static Dhcp Screen - ZyXEL Communications P873HNUP User Manual

Table 23 Network Settings > Home Networking > LAN Setup (continued)
LABEL
DHCP Relay Server
Address
IP Address
IP Addressing
Values
Beginning IP
Address
Ending IP Address
DHCP Server Lease
Time
Days/Hours/
Minutes
DNS Values
DNS
DNS Server 1
DNS Server 2
Apply
Cancel

8.3 The Static DHCP Screen

This table allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
Use this screen to change your ZyXEL Device's static DHCP settings. Click Network Settings >
Home Networking > Static DHCP to open the following screen.
Figure 40 Network Settings > Home Networking > Static DHCP
P-873HNUP-51B User's Guide
DESCRIPTION
This field is only available when you select DHCP Relay in the DHCP field.
Enter the IP address of the actual remote DHCP server in this field.
This field is only available when you select Enable in the DHCP field.
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the last of the contiguous addresses in the IP address pool.
This is the period of time DHCP-assigned addresses is used. DHCP
automatically assigns IP addresses to clients when they log in. DHCP
centralizes IP address management on central computers that run the DHCP
server program. DHCP leases addresses, for a period of time, which means that
past addresses are "recycled" and made available for future reassignment to
other systems.
This field is only available when you select Enable in the DHCP field.
Enter the lease time of the DHCP server.
This field is only available when you select Enable in the DHCP field.
Select the type of service that you are registered for from your Dynamic DNS
service provider.
Select Dynamic if you have the Dynamic DNS service.
Select Static if you have the Static DNS service.
Enter the first and second DNS (Domain Name System) server IP address the
ZyXEL Device passes to the DHCP clients.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Chapter 8 Home Networking
119