Table of Contents
Advertisement
Table 70 Security Settings > Firewall > Access Control (continued)
LABEL
Direction
Action
Modify
Apply
Cancel
15.4.1 Add/Edit an ACL Rule
Click Add New ACL Rule or the Edit icon next to an existing ACL rule in the Access Control
screen. The following screen displays.
Figure 94 Security Settings > Firewall > Access Control > Add/Edit
The following table describes the labels in this screen.
Table 71 Security Settings > Firewall > Access Control > Add/Edit
LABEL
General
Filter Name
P-873HNUP-51B User's Guide
DESCRIPTION
This displays the direction of traffic to which this rule applies.
This field displays whether the rule silently discards packets (DROP), discards
packets and sends a TCP reset packet or an ICMP destination-unreachable
message to the sender (REJECT) or allows the passage of packets (ACCEPT).
Click the Edit icon to edit the rule.
Click the Delete icon to delete an existing rule. Note that subsequent rules move
up by one when you take this action.
Click Apply to save the DoS Protection settings.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Enter a descriptive name of up to 16 alphanumeric characters, not including
spaces, underscores, and dashes.
You must enter the filter name to add an ACL rule. This field is read-only if you
are editing the ACL rule.
Chapter 15 Firewall
201
Advertisement
Table of Contents
