Configuring Static Route For Routing To Another Network - ZyXEL Communications P873HNUP User Manual

802.11n wireless vdsl2 4-port gateway
Hide thumbs Also See for P873HNUP:
Table of Contents

Advertisement

The port forwarding settings you configured appear in the table. The ZyXEL Device forwards port
3
666 traffic to the computer with IP address 192.168.1.34.
Players on the Internet then can have access to Thomas' Doom server.
4.7 Configuring Static Route for Routing to Another
Network
In order to extend your Intranet and control traffic flowing directions, you may connect a router to
the ZyXEL Device's LAN. The router may be used to separate two department networks. This
tutorial shows how to configure a static routing rule for two network routings.
In the following figure, router R is connected to the ZyXEL Device's LAN. R connects to two
networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from
computer A (in N1 network) to computer B (in N2 network), the traffic is sent to the ZyXEL
Device's WAN default gateway by default. In this case, B will never receive the traffic.
N1
P-873HNUP-51B User's Guide
A
R
N2
B
Chapter 4 Tutorials
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-873hnup-51b

Table of Contents