Table of Contents
Advertisement
The following table describes the fields in this screen.
Table 29 Network Settings > Home Networking > 5th Ethernet Port
LABEL
State
Apply
Cancel
The
8.10
LAN VLAN Screen
Click Network Settings > Home Networking > LAN VLAN to open this screen. Use this screen
to control the VLAN ID and IEEE 802.1p priority tags of traffic sent out through individual LAN
ports.
Figure 46 Network Settings > Home Networking > LAN VLAN
The following table describes the fields in this screen.
Table 30 Network Settings > Home Networking > LAN VLAN
LABEL
Lan Port
Tag Operation
802.1P Mark
P-873HNUP-51B User's Guide
DESCRIPTION
Select Enable to use the Ethernet WAN port as a LAN port on the ZyXEL Device.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to exit this screen without saving.
DESCRIPTION
These represent the ZyXEL Device's LAN ports.
Select what you want the ZyXEL Device to do to the IEEE 802.1q VLAN ID and
priority tags of downstream traffic before sending it out through this LAN port.
•
Unchange - Don't do anything to the traffic's VLAN ID and priority tags.
•
Add - Add VLAN ID and priority tags to untagged traffic.
•
Remove - Delete one tag from tagged traffic. If the frame has double tags,
this removes the outer tag. This does not affect untagged traffic.
•
Remark - Change the value of the outer VLAN ID and priority tags.
Use this option to set what to do for the IEEE 802.1p priority tags when you add
or remark the tags for a LAN port's downstream traffic. Either select Unchange
to not modify the traffic's priority tags or select an priority from 0 to 7 to use. The
larger the number, the higher the priority.
Chapter 8 Home Networking
131
Advertisement
Table of Contents
