Remote Management Setup - ZyXEL Communications Prestige 316 User Manual

Prestige 316 Broadband Sharing Gateway / Wireless LAN
Time Server IP Address
Current Time: New Time
Current Date: New Date
Time Zone= GMT+0800
Once you have filled in the new time and date, press [Enter] to save the setting and press [Esc] to return
to Menu 24.

11.4 Remote Management Setup

Telnet and FTP do not support encryption, so for very strong security both services should be shut down.
This is done in Menu 24.11 – Remote Management Control. Enter 11 from Menu 24 to bring up this
menu. All telnet and FTP activity, both LAN and WAN may be disabled by selecting No (press [space
bar] to toggle Yes to No) in the two fields in this menu. If you just wish to block certain users from using
these activities, then please use filtering – see Menu 21.1.
Figure 11-7
NOTE: Remote management (telnet) is only allowed for one single IP host at a
time (specified if Secured Client IP field is other than 0.0.0.0 – for Telnet only)
Remote management (FTP) is only allowed for one single IP host at a time but
unlike Telnet, you are not allowed to set the IP address.
11-6
Enter the IP address of your time server. Check with your ISP/network
administrator if you are unsure of this information.
Enter the new time in hour, minute and second format.
Enter the new date in month, date and year format.
Press [space bar] to set the time difference between your time zone and
Greenwich Mean Time (GMT). Be aware if/when daylight savings time alters
this time difference for your time zone.
Menu 24.11 - Remote Management Control
FTP service active= Yes
Telnet service active= Yes
Secured Client IP= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Menu 24.11 – Remote Management Control
when the field Telnet service active is set at Yes.
System Maintenance and Information