Interface Grouping Criteria - ZyXEL Communications EX3510-B0 User Manual

Table 75 Interface Group Configuration (continued)
LABEL
Filter Criteria
WildCard
Support
Modify
Cancel
OK

15.2.2 Interface Grouping Criteria

Click the Add button in the Interface Grouping Configuration screen to open the following screen. Use
this screen to automatically add clients to an interface group based on specified criteria. You can
choose to define a group based on a MAC address, a vendor ID (DHCP option 60), an Identity
Association Identifier (DHCP option 61), vendor specific information (DHCP option 125), or a VLAN
group.
Figure 119 Interface Grouping Criteria
Chapter 15 Interface Grouping
DESCRIPTION
This shows the filtering criteria. The LAN interface on which the matched traffic is received will
belong to this group automatically.
This shows if wildcard on DHCP option 60 is enabled.
Click the Edit icon to change the group setting.
Click the Delete icon to delete this group from the Zyxel Device.
Click Cancel to exit this screen without saving any changes.
Click OK to save your changes.
EX3510-B0 User's Guide
196