Interface Grouping Criteria - ZyXEL Communications VMG3312-T20A User Manual

Table 73 Interface Group Configuration (continued)
LABEL
WildCard
Support
Modify
OK
Cancel

13.2.2 Interface Grouping Criteria

Click the Add button in the Interface Grouping Configuration screen to open the following screen.
Figure 101 Interface Grouping Criteria
The following table describes the fields in this screen.
Table 74 Interface Grouping Criteria
LABEL
Source MAC
Address
DHCP Option 60
Enable
wildcard
DHCP Option 61
DHCP Option
125
Enterprise
Number
Manufactur
er OUI
Chapter 13 Interface Grouping
DESCRIPTION
This shows if wildcard on DHCP option 60 is enabled.
Click the Edit icon to change the group setting
Click the Delete icon to delete this group from the VMG.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Select this option and enter the source MAC address of the packet.
Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic, such
as the type of the hardware or firmware.
Select this option to be able to use wildcards in the Vendor Class Identifier configured for DHCP
option 60.
Select this and enter the device identity of the matched traffic.
Enter the Identity Association Identifier (IAID) of the device, for example, the WAN connection
index number.
Select this and enter vendor specific information of the matched traffic.
Enter the vendor's 32-bit enterprise number registered with the IANA (Internet Assigned Numbers
Authority).
Specify the vendor's OUI (Organization Unique Identifier). It is usually the first three bytes of the
MAC address.
VMG3312-T20A User's Guide
186