Manage The Configuration File Or Reset To Factory Defaults; Save The Configuration - NETGEAR ProSAFE WNDAP380R Reference Manual

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
Manage the Configuration File or Reset to Factory
Defaults
The wireless access point settings are stored in the configuration file. You can save this file
(back it up) to a computer, restore it from a computer, or reset it to factory default settings.
•

Save the Configuration

• Restore the Configuration
• Restore the Wireless Access Point to the Factory Default Settings
• Reboot the Wireless Access Point without Restoring the Default Configuration
Save the Configuration
NETGEAR recommends that you back up your configuration after you have made changes
to the configuration.

To save your settings:
1. Select Maintenance > Upgrade > Backup Settings.
The Backup Settings screen displays.
2. Click Backup.
Your browser extracts the configuration file (the file name is config) from the wireless
access point and prompts you for a location on your computer to store the file.
3. Follow the instructions of your browser to save the file.
Management
69