NETGEAR ProSAFE WNDAP380R Reference Manual page 143

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
| | | | | | | |-1
| | | | | | | |-2
| | | | | | | |-3
| | | | | | |
| | | | | |-sta>
| | | | | | |-queue>
| | | | | | | |-0
| | | | | | | |-1
| | | | | | | |-2
| | | | | | | |-3
| | | | | | |
| | | | | |
| | | | |-powersave
| | | |
| | |
| |
| |-radius>
| | |-primary>
| | | |-auth port>
| | | |-acct port>
| | | |-auth secret>
| | | |-acct secret>
| | | |-auth server>
| | | |-acct server>
| | |
| | |-secondary>
| | | |-auth port>
| | | |-acct port>
| | | |-auth secret>
| | | |-acct secret>
| | | |-auth server>
| | | |-acct server>
| |
| |-remote>
| | |-ssh
| | |-telnet
| |
| |-snmp-setting>
| | |-read community
| | |-read-write community
| | |-snmp-status
| | |-trap community
| | |-trap server
| | |-trap-port
| |
| |-spanning-tree
| |
| |-syslog>
--Access point low-priority data
--Access point video data
--Access point voice data
--Station
--Queue
--Station best effort voice data
--Station low-priority data
--Station video data
--Station voice data
--WMM power save enable
--Radius server settings
--Primary server
--Authentication port
--Accounting port
--Authentication Shared secret
--Accounting server
--Authentication server
--Accounting Shared secret
--Secondary server
--Authentication port
--Accounting port
--Authentication Shared secret
--Accounting Shared secret
--Authentication server
--Accounting Shared secret
--Remote access settings
--Enable remote access via SSH
--Enable remote access via Telnet
--SNMP settings
--SNMP Read Community
--SNMP Read Write Community
--SNMP status
--SNMP Trap Community
--SNMP Trap Server IP address
--SNMP Trap port
--Enable spanning tree protocol
--Syslog setting
Command-Line Reference
143