Manage The Configuration File Or Reset To Factory Default; Save The Configuration - NETGEAR ProSAFE WN203 Reference Manual

ProSAFE Single Band 802.11n Wireless Access Point WN203
Manage the Configuration File or Reset to Factory
Default
The wireless access point settings are stored in the configuration file. You can save this file
(back it up) to a computer, restore it from a computer, or reset it to factory default settings.
•

Save the Configuration

• Restore the Configuration
• Restore the Wireless Access Point to the Factory Default Settings
• Reboot the Wireless Access Point without Restoring the Default Configuration
Save the Configuration
After you change the configuration, NETGEAR recommends that you back up the
configuration.

To save your settings:
1. Select Maintenance > Upgrade > Backup Settings.
The Backup Settings screen displays.
2. Click the Backup button.
Your browser extracts the configuration file (the file name is config) from the wireless
access point and prompts you for a location on your computer to store the file.
3. Follow the instructions of your browser to save the file.
Management
57