Factory Default Settings - NETGEAR ProSAFE WNDAP380R Reference Manual

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
Table 5. Technical specifications (continued)
Feature
Electrical and Physical Specifications
Power adapter
Physical specifications
Environmental
specifications
Electromagnetic
compliance

Factory Default Settings

You can use the Reset button located on the rear of the wireless access point to reset all
settings to their factory defaults. This is called a hard reset.
To perform a hard reset, use a sharp object to press and hold the Reset button for
approximately 10 seconds (until the Test LED blinks rapidly). This returns the wireless access
point to the factory configuration settings that are shown in the following table.
Note: Pressing the Reset button for less than 10 seconds simply causes
the wireless access point to reboot.
Table 6. Default configuration settings
Feature
Login for management and configuration
LAN management address
Subnet mask for management address
Required static address for management computer
User name (case-sensitive) for login
Login password (case-sensitive) for login
Description
12 VDC, 1A; plug is localized to country of sale
• Dimensions (h x w x d): 253.75 x 253.75 x 54.76 mm (10.0 x 10.0 x 2.16 in.)
• Weight: 1.5 kg (3.31 lb)
Operating temperature: 0 to 55°C (32 to 131°F)
Operating humidity: 10–9%, noncondensing
CCC and SRRC
Supplemental Information
127
Description
192.168.0.100
255.255.255.0
192.168.0.210 and 255.255.255.0
admin
password