NETGEAR ProSAFE WNDAP380R Reference Manual page 126

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
Table 5. Technical specifications (continued)
Feature
802.11a/na wireless specifications
802.11a data rates
802.11na data rates
802.11a/na
operating frequencies
802.11 a/na encryption
Management and Other Specifications
Network management
Maximum clients
Status LEDs
Description
6, 9, 12, 18, 24, 36, 48, 54 Mbps, and auto-rate capable (referred to as Best)
Data rates for a 20 MHz channel width and an automatic guard interval:
0 / 7.2 Mbps, 1 / 14.4 Mbps, 2 / 21.7 Mbps, 3 / 28.9 Mbps, 4 / 43.3 Mbps,
5 / 57.8 Mbps, 6 / 65 Mbps, 7 / 72.2 Mbps, 8 / 14.44 Mbps, 9 / 28.88 Mbps,
10 / 43.33 Mbps, 11 / 57.77 Mbps, 12 / 86.66 Mbps, 13 / 115.56 Mbps,
14 / 130 Mbps, 15 / 144.44 Mbps and auto-rate capable (referred to as Best)
Data rates for a 20 MHz channel width and a long guard interval (800 ms):
0 / 6.5 Mbps, 1 / 13 Mbps, 2 / 19.5 Mbps, 3 / 26 Mbps, 4 / 39 Mbps, 5 / 52 Mbps,
6 / 58.5 Mbps, 7 / 65 Mbps, 8 / 13 Mbps, 9 / 26 Mbps, 10 / 39 Mbps, 11 / 52 Mbps,
12 / 78 Mbps, 13 / 104 Mbps, 14 / 117 Mbps, 15 / 130 Mbps and auto-rate capable
(referred to as Best)
Data rates for a 40 MHz channel width and an automatic guard interval:
0 / 15 Mbps, 1 / 30 Mbps, 2 / 45 Mbps, 3 / 60 Mbps, 4 / 90 Mbps, 5 / 120 Mbps,
6 / 135 Mbps, 7 / 150 Mbps, 8 / 30 Mbps, 9 / 60 Mbps, 10 / 90 Mbps, 11 / 120 Mbps,
12 / 180 Mbps, 13 / 240 Mbps, 14 / 270 Mbps, 15 / 300 Mbps and auto-rate capable
(referred to as Best)
Data rates for a 40 MHz channel width and a long guard interval (800 ms):
0 / 13.5 Mbps, 1 / 27 Mbps, 2 / 40.5 Mbps, 3 / 54 Mbps, 4 / 81 Mbps, 5 / 108 Mbps,
6 / 121.5 Mbps, 7 / 135 Mbps, 8 / 27 Mbps, 9 / 54 Mbps, 10 / 81 Mbps,
11 / 108 Mbps, 12 / 162 Mbps, 13 / 216 Mbps, 14 / 243 Mbps, 15 / 270 Mbps and
auto-rate capable (referred to as Best)
5.745–5.825 GHz
• 64-bit, 128-bit, and 52-bit WEP
• AES
• TKIP
• Remote configuration and management through the web management
interface, through SNMP, or through Telnet or SSH with the command-line
interface (CLI).
• SNMP management supports SNMP MIB I, MIB II, 802.11 MIB and proprietary
configuration MIB.
Limited by the amount of wireless network traffic generated by each node; a
maximum of 128 clients is supported.
• Power/Test LED
• Active LED
• LAN LED
• WLAN LED (2.4 GHz and 5 GHz)
Supplemental Information
126