NETGEAR ProSAFE WNDAP380R Reference Manual page 138

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
| | | |
| | | |-channel auto
| | | |-channel-width
| | | |-client-isolation
| | | |-data-rate
| | | |-dtim
| | | |-fragmentation-length
| | | |-guard-interval
| | | |
| | | |-macacl add
| | | |-macacl del
| | | |-macacl del all
| | | |
| | | |-max-client
| | | |-power
| | | |-preamble-type
| | | |
| | | |-rifs-transmission
| | | |
| | | |-rogue-ap-detection
| | | |-rogue-ap-detection knownap add
| | | |-rogue-ap-detection knownap del MAC
| | | |-rogue-ap-detection knownap del all
| | | |
| | | |-rts-threshold
| | | |-wds
| | | |-wds>
| | | | |-1
| | | | |-1>
| | | | | |-authentication
| | | | | |-authentication open encryption
| | | | | |-name
| | | | | |-remote-mac
| | | | | |-wep-key
| | | | | |-wpa-passphrase
| | | | |
| | | | |-2
| | | | |-2>
| | | | | |-authentication
| | | | | |-authentication open encryption
| | | | | |-name
| | | | | |-remote-mac
| | | | | |-wep-key
| | | | | |-wpa-passphrase
| | | | |
| | | | |-3rd
| | | | |-3>
| | | | | |-authentication
and wireless mode)
--Set wireless channel to auto mode
--Wireless channel width
--Client isolation status
--Wireless transmission date rate
--Wireless DTIM period in beacon interval
--Wireless fragmentation threshold
--Interval (from interference from other
transmissions)
--Add wireless access control (ACL)
--Delete wireless access control (ACL)
--Delete wireless access control (ACL)
Database
--Maximum client
--Output power
--Wireless preamble (only effect on
802.11b rates)
--Enable successive frame transmission
at different transmit
--Enable rogue access point detection
--Add rogue access point detection
--Delete rogue access point detection
--Delete rogue access point detection
Database
--Wireless RTS/CTS threshold
--Wireless Bridge status
--Wireless Bridge setting
--1st WDS security profile status
--1st security profile
--Authentication type
--Data encryption
--Profile name
--Remote MAC
--Wireless wep key
--Wireless wpa passphrase
--2nd WDS security profile status
--2nd security profile
--Authentication type
--Data encryption
--Profile name
--Remote MAC
--Wireless wep key
--Wireless wpa passphrase
--3rd WDS security profile status
--3rd security profile
--Authentication type
Command-Line Reference
138