NETGEAR ProSAFE WNDAP380R Reference Manual page 58

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
The MAC Authentication screen displays. (The following figure shows some examples.)
2. (Optional) Click the 802.11a/na tab.
The MAC Authentication screen for the 802.11a/na modes displays.
3. Select the Turn Access Control On check box.
The access control feature is enabled.
4. From the Select Access Control Database drop-down menu, select one of the following
database options:
• Local MAC Address Database. The wireless access point uses the local MAC
address database for access control. This is the default setting.
• Remote MAC Address Database. The wireless access point uses the MAC address
database on an external RADIUS server on the LAN for access control. If you select
this database, you first need to configure the RADIUS server settings (see
RADIUS Server Settings
5. Click Refresh.
The Available Wireless Stations table is refreshed. The wireless access point places the
MAC addresses of the attached wireless clients in this table.
6. Populate the Trusted Wireless Stations table with MAC addresses.
on page 55).
Wireless Configuration and Security
58
Configure