NETGEAR ProSAFE WNDAP380R Reference Manual page 129

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
Table 6. Default configuration settings (continued)
Feature
Radio and wireless settings
Operating mode
Wireless access point name
Country and region
Wireless communication
Wireless modes
Wireless network names (SSIDs)
Broadcast network names (SSIDs)
Radio frequency channels
MCS index/data rate (transmission speed)
Channel width
Guard interval
Output power
Wireless on/off (radio scheduling)
RTS threshold
Fragmentation length
Beacon interval
Aggregation length
A-MPDU
RIFS transmission
DTIM interval
Description
Access point, infrastructure mode
netgearxxxxxx, where xxxxxx are the last 6 digits
of the wireless access point MAC address
Varies by region
2.4 GHz radio enabled
5 GHz radio enabled
11ng
11na
NETGEAR_11ng
NETGEAR_11na
Enabled
11ng: Auto
11na: Auto
Best
Note:
from IEEE Standard 802.11 specifications.
Actual throughput will vary. Network conditions
and environmental factors, including volume of
network traffic, building materials and
construction, and network overhead, lower
actual data throughput rate.
11ng: 20 MHz
11na: Dynamic 20/40 MHz
Auto
Full
Disabled
2347
2346
100
65535
Enabled
Disabled
3
Supplemental Information
129
Maximum wireless signal rate derived