Reboot Or Reset The Rfid Module - NETGEAR ProSAFE WNDAP380R Reference Manual

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
Setting
Traffic Meter
Server IP
Received (Pkts/bytes)
Transmitted (Pkts/bytes) The number of packets and the number of bytes that are transmitted by the RFID
Connection Duration

Reboot or Reset the RFID Module

You can reboot or reset the RFID module on the wireless access point. Resetting the RFID
module restores the defaults setting of the RFID module.

To reboot the RFID module:
1. Select RFID > Maintenance > Reboot.
The Reboot RFID Module screen displays:
2. Select the Yes radio button.
By default, the No radio button is selected.
3. Click Apply.

To reset the RFID module:
1. Select RFID > Maintenance > Reset.
The Reboot RFID Module screen displays:
Description
The IP address of the RFID server.
The number of packets and the number of bytes that are received by the RFID
module.
module.
The period that the connection between the RFID module and the RFID server has
been established.
Advanced Configuration
106