NETGEAR ProSAFE WNDAP380R Reference Manual page 142

Prosafe dual band wireless-n access point with rfid support
Hide thumbs Also See for ProSAFE WNDAP380R:
Table of Contents

Advertisement

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
| | | | |-7
| | | | |-7>
| | | | | |-access-control
| | | | | |-access-control-policy
| | | | | |-authentication
| | | | | |-authentication 8021x
| | | | | |
| | | | | |-authentication open encryption
| | | | | |
| | | | | |-authentication shared-key encryption --Wireless shared-key encryption
| | | | | |-broadcast
| | | | | |-dynamic-vlan
| | | | | |-name
| | | | | |-security-separation
| | | | | |
| | | | | |-ssid
| | | | | |-vlan
| | | | | |-wep-key
| | | | | |-wpa-passphrase
| | | | |
| | | |
| | | | |-8
| | | | |-8>
| | | | | |-access-control
| | | | | |-access-control-policy
| | | | | |-authentication
| | | | | |-authentication 8021x
| | | | | |
| | | | | |-authentication open encryption
| | | | | |
| | | | | |-authentication shared-key encryption --Wireless shared-key encryption
| | | | | |-broadcast
| | | | | |-dynamic-vlan
| | | | | |-name
| | | | | |-security-separation
| | | | | |
| | | | | |-ssid
| | | | | |-vlan
| | | | | |-wep-key
| | | | | |-wpa-passphrase
| | | | |
| | | |
| | | |-wmm>
| | | | |-enable
| | | | |-parameter>
| | | | | |-ap>
| | | | | | |-queue>
| | | | | | | |-0
--7th security profile enable
--7th security profile
--Access control enable
--Access control policy enable
--Wireless authentication type
--Select wireless 802.1x authentication
type
--Select wireless open encryption
authentication type
--Broadcast enable
--Dynamic VLAN id
--Profile name
--Disable associated wireless client
communication
--Network name (1-32 chars)
--VLAN id
--Wireless wep key type
--Wireless wpa passphrase
--8th security profile enable
--8th security profile
--Access control enable
--Access control policy enable
--Wireless authentication type
--Select wireless 802.1x authentication
type
--Select wireless open encryption
authentication type
--Broadcast enable
--Dynamic VLAN id
--Profile name
--Disable associated wireless client
communication
--Network name (1-32 chars)
--VLAN id
--Wireless wep key type
--Wireless wpa passphrase
--WMM settings
--WMM enable
--Qos parameter
--AP
--Queue
--Access point best effort voice data
Command-Line Reference
142

Advertisement

Table of Contents
loading

Table of Contents