Monitor The Rfid Module, Server, And Traffic - NETGEAR ProSAFE WNDAP380R Reference Manual

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
2. Specify the settings as explained in the following table:
Setting
RFID
Server Connection Type
RFID server table
Enable
Server IP Address
Server Port
Local Port
3. Click Apply.

Monitor the RFID Module, Server, and Traffic

The RFID (monitoring) screen provides a summary of the RFID module configuration, the
RFID server connection status, and the RFID traffic. This information is read only.

To view the RFID (monitoring) screen:
Select RFID > Monitor.
Description
Select the RFID check box to enable the RFID module to communicate with one
or more RFID servers. By default, the check box is cleared.
The server connection type applies to all RFID servers. From the drop-down
menu, select either TCP (the default setting) or UDP.
Select or clear the Enable check box to enable or disable the associated RFID
server.
The IP address of the RFID server, which can be a LAN or WAN IP address.
The port number on the RFID server that is used for communication with the
RFID module.
The port number on wireless access point that is used for communication with
the RFID server. You can configure the local port only when the server
connection type is UDP.
Advanced Configuration
104