NETGEAR ProSAFE WNDAP380R Reference Manual page 86

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

To configure advanced QoS:
1. Select Configuration > Wireless > Advanced > QoS Settings.
The advanced QoS Settings screen displays:
2. (Optional) Click the 802.11a/na tab.
The QoS Settings screen lets you configure advanced QoS for the 802.11a/na modes.
3. Specify the settings as explained in the following table:
Setting Description
AP EDCA parameters
AIFS Enter the Arbitration Inter-Frame Spacing (AIFS) interval that specifies the wait time (in
milliseconds) between data frames. A higher AIFS value means a higher priority for a
queue. Valid values for AIFS are 0 through 8.
The default values are Data 0: 3; Data 1: 7; Data 2: 1; Data 3: 1.
cwMin Enter the minimum contention window (cwMin) value that specifies the upper limit (in
milliseconds) of a range from which the initial random back-off wait time is determined.
Decreasing this value increases the priority of the queue. The value for cwMin needs to be
lower than the value for cwMax. Valid values are 0, 1, 3, 7, 15, 31, 63, 127, 255, 511, and
1023.
The default values are Data 0: 15; Data 1: 15; Data 2: 7; Data 3: 3.
Advanced Configuration
86