NETGEAR ProSAFE WNDAP380R Reference Manual page 123

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
2. In the Module Test section or the Network Test section, select an RFID server from the
drop-down menu.
3. In the Command field of the Module Test section or the Network Test section, enter a debug
command in hexadecimal format.
4. Click Send.
The Module Test section displays the messages that the RFID module sends to the RFID
server.
The Network Test section displays the messages that the RFID server sends to the RFID
module.
Troubleshooting
123