NETGEAR ProSAFE WNDAP380R Reference Manual page 105

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
The following table explains the fields of the RFID (monitoring) screen:
Setting
RFID
Status
Unique ID
Module ID
Module Name
Firmware Version
Hardware Version
Connection Status
Server Connection Type
Server IP
Server Port
Local IP
Local Port
Connection Status
Description
The status is either 1 or 0.
A unique number.
A unique number.
The name that is assigned to the RFID module.
The firmware version of the RFID module.
The hardware version of the RFID module.
The server connection type applies to all RFID servers and is either TCP or UDP.
The IP address of the RFID server.
The port number on the RFID server.
The IP address of the RFID module, which is normally the same as the IP address of
the wireless access point.
The port number on the RFID module.
The connection status between the RFID module and the RFID server. The options
are Connected and Disconnected.
Advanced Configuration
105
The RFID is
preinstalled and
preconfigured.
You cannot
configure these
settings.