NETGEAR ProSAFE WNDAP380R Reference Manual page 99

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
The Bridging screen displays (see the following figure).
b. (Optional) Click the 802.11a/na tab.
The Bridging screen lets you configure a point-to-point wireless network for the
802.11a/na modes.
c. Select the Enable Wireless Bridging check box.
The Local MAC Address field is a nonconfigurable field that shows the MAC address
of the wireless access point.
d. Select the Wireless Point to Multi-Point Bridge radio button.
The screen adjusts. The profile table shows four security profiles.
e. Select a security profile to edit by selecting the corresponding radio button to the left
of the profile.
f. Edit to configure the selected security profile settings.
The Edit Security Profile screen displays for the selected security profile. (The
following figure contains some examples.)
Advanced Configuration
99