NETGEAR ProSAFE WNDAP380R Reference Manual page 53

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
Figure 11. Legacy 802.1X
Configure WPA with RADIUS, WPA2 with RADIUS, and WPA & WPA2 with
RADIUS
WPA, WPA2, and WPA & WPA2 security requires RADIUS-based 802.1x authentication, so
you also need to define RADIUS server settings. For information about RADIUS servers, see
Configure RADIUS Server Settings
The selections that are available from the Data Encryption drop-down menu depend on the
type of WPA authentication that you select from the Network Authentication drop-down menu
and are shown in the table that follows the figures.
• WPA with RADIUS
Figure 12. WPA with RADIUS
• WPA2 with RADIUS
Figure 13. WPA2 with RADIUS
• WPA & WPA2 with RADIUS
Figure 14. WPA & WPA2 with RADIUS
Table 3. Settings for WPA with RADIUS, WPA2 with RADIUS, and WPA & WPA2 with RADIUS
Setting Descriptions
TKIP Temporal Key Integrity Protocol (TKIP) is the standard encryption method used with WPA. You
can also use TKIP with WPA2.
Note: TKIP provides only legacy (slower) rates of operation. If you want to use the 11n rates and
speed, NETGEAR recommends WPA2 authentication with AES encryption.
on page 55.
Wireless Configuration and Security
53