View The Activity Log - NETGEAR ProSAFE WNDAP380R Reference Manual

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
Setting
Idle Time
Tx Sequence
Rx Sequence
Capability
Cipher
SNR
Recv. Bytes
Trans. bytes
Assoc. Time Stamp
IP Address
Channel Width

View the Activity Log

You can view the wireless access point's activity logs onscreen and save the logs.

To display the activity log and save it:
1. Select Monitoring > Logs.
The Logs screen displays:
2. (Optional) Click Refresh.
Description
The time since the last frame was received from the wireless client.
The sequence number of the last frame that was transmitted to the wireless client.
The sequence number of the last frame that was received from the wireless client.
The summary of the capability of the wireless client that was detected during
association.
The cipher that the wireless client is using and that defines the type of encryption.
The signal-to-noise ratio (SNR) that indicates how much the signal of the wireless
client has been corrupted by noise.
The number of bytes received on the wireless client since it last started up.
The number of bytes transmitted by the wireless client since it last started up.
The time when these details of the wireless client were retrieved.
The IP address of the wireless client.
The channel width at which the wireless client operates.
Monitoring
113