NETGEAR ProSAFE WNDAP380R Reference Manual page 50

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
Setting Description
Network Authentication WPA & WPA2 with
and Data Encryption Radius
(continued)
WPA-PSK
WPA2-PSK
WPA-PSK &
WPA2-PSK
Wireless Client Security If you enable wireless client security separation by selecting Enable from the
Separation drop-down menu, the associated wireless clients cannot communicate with
each other. By default, Disable is selected from the drop-down menu. This
feature is intended for hotspots and other public access situations.
Dynamic VLAN From the drop-down menu, select how VLANs operate by making one of the
following selections:
•
•
•
For dynamic VLANs to operate (that is, the selection is Optional or Required),
the following is required:
•
•
Configure the RADIUS server setting. TKIP + AES
encryption is the default encryption.
See Configure WPA with RADIUS, WPA2 with RADIUS,
and WPA & WPA2 with RADIUS
Note: This setting allows clients to connect through either
WPA with TKIP or WPA2 with AES.
Enter a WPA passphrase and select TKIP or TKIP + AES
encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK
Enter a WPA passphrase and select AES or TKIP + AES
encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK
Note: Select this setting only if all clients support WPA2.
Enter a WPA passphrase. TKIP + AES encryption is the
default encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK
Note: This setting allows clients to connect through either
WPA with TKIP or WPA2 with AES.
Disable. Disables dynamic VLANs, and enables static VLANs. This is the
default setting.
Optional. Enables dynamic VLANs, but if a RADIUS server does not return
a VLAN ID, the wireless client is still allowed to connect to the wireless
access point.
Required. Enables dynamic VLANs. If a RADIUS server does not return a
VLAN ID, the wireless client is not authenticated and cannot connect to the
wireless access point.
The hubs and switches on your LAN must support the VLAN (802.1Q)
standard.
The authentication is set to any RADIUS type authentication: either the
network authentication in the wireless security profile or the remote MAC
address database authentication for the MAC Authentication feature can be
used.
Wireless Configuration and Security
50
on page 53.
on page 54.
on page 54.
on page 54.