NETGEAR ProSAFE WNDAP380R Reference Manual page 28

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
6. Click Apply.
The selected wireless mode is now enabled.
Note: For information about how to configure advanced wireless settings,
see Configure Advanced Wireless Settings
Configure 802.11a/na Wireless Settings
If you click the 802.11a/na tab on the basic Wireless Settings screen, you can configure the
802.11a or 802.11na wireless mode, the SSID, and other wireless settings.

To configure the 802.11a/na wireless settings:
1. Select Configuration > Wireless > Basic > Wireless Settings.
2. Click the 802.11a/na tab.
The basic Wireless Settings screen displays the 802.11na settings.
Note: The radio wave icon (
(a or na).
) displays next to the selected radio mode
Installation and Basic Configuration
28
on page 82.