Configure The Basic Wireless Settings - NETGEAR ProSAFE WNDAP380R Reference Manual

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
2. Configure the settings as explained in the following table:
Setting
Select the Enable radio button to enable the DHCP server. Use the default settings or specify the pool of IP
addresses to be assigned by setting the starting IP address and ending IP address. These addresses
should be part of the same IP address subnet as the wireless access point's LAN IP address.
DHCP Server VLAN ID
Starting IP Address
Ending IP Address
Subnet Mask
Gateway IP Address
Primary DNS Address
Secondary DNS Address Enter the IP address of the secondary DNS server available to DHCP clients.
Primary WINS Server
Secondary WINS Server Enter the IP address of the secondary WINS server for the network, if there is
Lease
3. Click Apply.

Configure the Basic Wireless Settings

For proper compliance and compatibility between similar products in your coverage area, you
need to configure the 802.11b/g/n and 802.11a/n wireless adapter settings correctly, including
the operating channel and country. You also need to configure the basic wireless network
settings for wireless devices to connect to your network. For other wireless features,
including wireless security, see
Description
Enter the VLAN ID for the DHCP server. The VLAN ID range is from 1 to 4094.
The default VLAN is 1.
Enter the first address in the range of IP addresses to be assigned to DHCP
clients. The default address is 192.168.1.02.
Enter the last address in the range of IP addresses to be assigned to DHCP
clients. The default address is 192.168.1.50.
Enter the subnet mask to be used by DHCP clients. The default mask is
255.255.255.0.
Enter the IP address of the default routing gateway to be used by DHCP clients.
The default address is 192.168.0.1.
Enter the IP address of the primary Domain Name System (DNS) server
available to DHCP clients.
Enter the IP address of the primary WINS server for the network, if there is any.
any.
Enter the period that the DHCP server grants to DHCP clients to use the
assigned IP addresses. The default time is one day.
Chapter 3, Wireless Configuration and
Installation and Basic Configuration
24
Security.