Manage The Configuration File Or Reset To Factory Defaults; Save The Configuration - NETGEAR WAC720 Reference Manual

ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Manage the Configuration File or Reset to Factory
Defaults
The wireless access point settings are stored in the configuration file. You can save this file
(back it up) to a computer, restore it from a computer, or reset it to factory default settings, as
described in the following sections:
•

Save the Configuration

• Restore the Configuration
• Restore the Wireless Access Point to the Factory Default Settings
• Reboot the Wireless Access Point Without Restoring the Default Configuration
Save the Configuration
To save your settings:

1. Select Maintenance > Upgrade > Backup Settings.
2. Click the Backup button.
Your browser extracts the configuration file (the file name is config) from the wireless
access point and prompts you for a location on your computer to store the file.
3. Follow the instructions of your browser to save the file.
Management and Monitoring
54