Monitor Wireless Clients - NETGEAR ProSAFE WNDAP380R Reference Manual

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
Setting
Channel / Frequency
Rogue AP Detection

Monitor Wireless Clients

The Wireless Stations screen contains the Available Wireless Stations table. This table
shows all IP devices that are associated with the wireless access point in the wireless
network that is defined by the wireless network name (SSID). The table headings indicate the
wireless modes (802.11b, 802.11bg, or 802.11ng for the 2.4-GHz band, and 802.11a or
802.11na for the 5-GHz band).
Note: A wireless network can include multiple wireless access points, all
using the same network name (SSID). This uniformity extends the
reach of the wireless network and allows users to roam from one
wireless access point to another, providing seamless network
connectivity. Under these circumstances, be aware that the
Available Wireless Stations table includes only the stations
associated with this wireless access point.

To view the attached wireless clients, and to view details for a wireless client:
1. Select Monitoring > Wireless Stations.
The Wireless Stations screen displays:
2. (Optional) Click Refresh to update the list.
If the wireless access point is rebooted, the wireless client data is lost until the wireless
access point rediscovers the devices. When you click Refresh, the wireless access point
attempt to detect associated devices.
Description
The channel that the wireless port is using. For information about how to change the
channel and frequency, see
and Configure 802.11a/na Wireless Settings
Enabled indicates that rogue AP detection is enabled. Disabled indicates that it is not.
Monitoring
111
Configure 802.11b/bg/ng Wireless Settings
on page 28.
on page 25