Changing System Parameters - Avaya Communication Manager Administrator's Manual

Changing System Parameters

You can modify the system parameters that are associated with some of the system features.
For example, you can use the system parameters to allow music to play if callers are on hold or
to allow trunk-to-trunk transfers on the system.
Generally, Avaya sets your system parameters when your system is installed. However, you
can change these parameters as your organization's needs change. For example, let us say
that you are told that the number of rings between each point for new coverage paths should
change from 4 to 2 rings.
To change the number of rings:
1. Type change system-parameters coverage/forwarding and press Enter.
The System Parameters Call Coverage/Call Forwarding
Figure 15: System-Parameters Call Coverage/Call Forwarding screen
CALL COVERAGE/FORWARDING PARAMETERS
COVERAGE
FORWARDING
2. In the Local Coverage Subsequent Redirection/CFWD No Answer Interval field, type 2.
3. Press Enter to save your changes.
Each telephone in a Call Coverage path now rings twice before the call routes to the next
coverage point. The Local Cvg Subsequent Redirection/CFWD No Ans Interval field
also controls the number of rings before the call is forwarded when you use Call Forwarding
for busy/don't answer calls. This applies only to calls covered or forwarded to local
extensions. Use Off-Net to set the number of rings for calls forwarded to public network
extensions.
SYSTEM PARAMETERS -- CALL COVERAGE / CALL FORWARDING
Local Cvg Subsequent Redirection/CFWD No Ans Interval (rings): 2
Off-Net Cvg Subsequent Redirection/CFWD No Ans Interval (rings): 2
Coverage - Caller Response Interval (seconds): 4
External Coverage Treatment For Transferred Incoming Calls? n
Changing System Parameters
screen appears.
Page 1 of x
Keep Held SBA At Coverage Point? y
Call Forward Override? n
Coverage After Forwarding? y
Issue 1 June 2005 57