Telephone Feature Buttons - Avaya Communication Manager Administrator's Manual

Telephone Feature Buttons

The following table provides descriptions of the feature buttons that you can administer on
multiappearance telephones. It also lists the administrable software names and recommended
button label names. Display buttons support telephones equipped with alphanumeric displays.
Note that some buttons may require 1-lamp or 2-lamp buttons. Some buttons are not allowed on
some systems and on some phones.
Note:
An NI-BRI telephone with Communication Manager has only the Conference,
Note:
Transfer, Hold, and Drop feature buttons, none of which requires administration.
On an NI-BRI telephone, you may assign additional feature buttons only as call
appearances. As a result, NI-BRI telephone users must access all other features
of Communication Manager using feature access codes.
Additionally, the number of call appearance buttons administered in
Communication Manager (the default is three) must match the number of call
appearances programmed on the telephone.
Finally, Communication Manager does not support bridged call appearances for
NI-BRI phones.
Table 2: Telephone feature buttons
Button name
#
abr-prog
abr-spchar
Button label Description
Autodial You can administer the # button as an
autodial feature button by entering the
Audix number in the Button
Assignments field on the
screen.
AbrvDial Abbreviated Dialing Program: allows
Program users to program abbreviated dialing
and autodial buttons or to store or
change numbers in a personal list or
group list associated with the station.
AbrvDial Abbreviated Dialing Special
(char) Character: allows users to enter an
associated special character [~, ~m
(mark), ~p (pause), ~s (suppress), ~w
(wait for dial tone), or ~W (wait
forever)] when programming an
abbreviated dialing list entry.
Telephone Feature Buttons
Maximum
1 per
station
Station
1 per
station
1 each per
station
1 of 21
Issue 1 June 2005 123