Using Templates To Add Telephones - Avaya Communication Manager Administrator's Manual

Hide thumbs Also See for Communication Manager:
Table of Contents

Advertisement

3. Type the port address in the Port field.
Note:
Port 1720 is turned off by default to minimize denial of service situations. This
Note:
applies to all IP softphones release 5.2 or later. You can change this setting, if
you have root privileges on the system, by typing the command: /opt/ecs/
sbin ACL 1720 on or off.
4. Type a name to associate with this telephone in the Name field. The name you enter
displays on called phones that have display capabilities. Also, some messaging
applications, such as INTUITY, recommend that you enter the user's name (last name first)
and their extension to identify the telephone.
Note:
For 4620SW or 4610SW telephones, the Name field is supported by Unicode
Note:
language display. You must be using ASA or MSA. For more information on
Unicode language display, see
5. Press Enter to save your changes.
To make changes to this new telephone, such as assigning coverage paths or feature buttons,
type change station nnnn, where nnnn is the extension of the new telephone. Press
Enter. See
Adding Feature Buttons

Using Templates to Add Telephones

A quick way to add phones is to copy the information from an existing telephone and modify it
for each new telephone. For example, you can configure one telephone as a template for an
entire work group. Then, you merely duplicate the template station screen to add all the other
extensions in the group.
Note that only phones of the same model can be duplicated. The duplicate command copies all
the feature settings from the template telephone to the new telephones.
To duplicate an existing telephone:
1. Type display station nnnn, where nnnn is the extension of the station screen you
want to duplicate to use as a template. Press Enter. Verify that this extension is the one you
want to duplicate.
2. Press Cancel to return to the command prompt.
3. Type duplicate station nnnn, where nnnn is the extension you want to duplicate.
Press Enter.
The system displays a blank duplicate Station screen.
Administering Unicode display
on page 121 for more information.
Using Templates to Add Telephones
on page 181.
Issue 1 June 2005
83

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents