Chapter 3: Managing Telephones; Installing New Telephones - Avaya Communication Manager Administrator's Manual

Chapter 3: Managing Telephones

Installing New Telephones

Simple administration allows you to plug a telephone into a jack and dial a sequence to start up
service to the telephone. The dialing sequence sets up an association between the telephone
and the corresponding station administration.
!
SECURITY ALERT:
If you do not manage this feature carefully, its unauthorized use may cause you
SECURITY ALERT:
security problems. Consult the Avaya Products Security Handbook for
suggestions on how to secure your system and find out about obtaining
additional security information.
For traditional instructions, see
Before you start
On the Feature-Related System Parameters
Activation (CTA) Enabled field is y and the TTI Enabled field is y.
Complete the Station screen for the new telephone and type x in the port field. Note that the
telephone type must match the board type. For example, match a two-wire digital telephone
with a port on a two-wire digital circuit pack. Use this procedure with all circuit-switched phones
except BRI (ISDN) and model 7103A.
Tip:
See
Tip:
to Add Telephones
Installing New
Completing the station screens
if you want to add a number of phones with similar settings.
Telephones.
screen, be sure the Customer Telephone
for more information. See Using Templates
Issue 1 June 2005 77