Adding A Pcol Trunk Group - Avaya Communication Manager Administrator's Manual

8. In the Trunk Termination field, type rc.
Use rc in this field when the distance to the central office or the media server at the other
end of the trunk is more than 3,000 feet. Check with your service provider if you're not sure
of the distance to your central office.
9. Press Enter to save your changes.
Now you're ready to add trunks to this trunk group. See
page 439.
Related topics
See Inserting and Absorbing Digits
incoming digit strings to match your dial plan.

Adding a PCOL Trunk Group

In most cases, when administering Personal Central Office Line (PCOL) trunk groups, Avaya
recommends leaving the default settings in fields that aren't specifically mentioned in the
following instructions. Your Avaya representative or network service provider can give you more
information. Your settings in the following fields must match your provider's settings:
Trunk Type
●
Trunk Direction
●
!
CAUTION:
Use the list above as a starting point and talk to your service provider. Depending
CAUTION:
on your particular application, you may need to coordinate additional
administration with your service provider.
Before you start
Before you can administer any trunk group, you must have one or more circuit packs of the
correct type with enough open ports to handle the number of trunks you need to add. To find out
what circuit packs you need, see the Hardware Guide for Avaya Communication Manager,
555-245-207.
Adding Trunks to a Trunk Group
on page 442 for instructions on matching modifying
Adding a PCOL Trunk Group
on
Issue 1 June 2005 427