Table of Contents
Advertisement
Ethernet Specifications
Ethernet Specifications
IEEE Standards Supported
Platforms Supported
Ports Supported
Auto Negotiation
Port Mirroring / Monitoring
802.1Q Hardware Tagging
Jumbo Frame Configuration
Maximum Frame Size
Ethernet Port Defaults
The following table shows Ethernet port default values:
Parameter Description
Interface Line Speed
Interface Duplex Mode
Trap Port Link Messages
Interface Configuration
Peak Flood Rate Configuration
Interface Alias
Maximum Frame Size
Digital Diagnostics Monitoring
(DDM)
page 1-2
802.3 Carrier Sense Multiple Access with Collision Detection
(CSMA/CD)
802.3u (100BaseTX)
802.3ab (1000BaseT)
802.3z (1000Base-X)
802.3ae (10GBase-X)
OmniSwitch 10K
Ethernet (10 Mbps)
Fast Ethernet (100 Mbps)
Gigabit Ethernet (1 Gb/1000 Mbps)
10 Gigabit Ethernet (10 Gb/10000 Mbps)
Supported
Supported
Supported
Supported on Gigabit Ethernet and 10 Gigabit Ethernet ports
1553 bytes (10/100 Mbps)
9216 bytes (1/10 Gbps)
Command
interfaces speed
interfaces duplex
interfaces link-trap
interfaces
interfaces flood-limit
interfaces alias
interfaces max-frame-
size
interfaces ddm
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring Ethernet Ports
Default Value/Comments
AutoNeg
AutoNeg
Disabled
Enabled
4 Mbps (10 Ethernet)
49 Mbps (100 Fast Ethernet)
496 Mbps (1 Gigabit Ethernet)
997 Mbps (10 Gigabit Ethernet)
None configured
1553 (untagged) Ethernet packets
1553 (tagged) Ethernet packets
9216 Gigabit Ethernet packets
Disabled
March 2011
Advertisement
Table of Contents
