Table of Contents
Advertisement
An example of how the example configuration commands might display when entered sequentially on the
command line is given here:
-> policy condition cond3 source ip 10.10.2.3
-> policy action action2 priority 7
-> policy rule my_rule condition cond3 action action2
-> qos apply
ASCII-File-Only Syntax
When the policy rule, policy condition, and policy action commands as well as any of the condition
group commands are configured and saved in an ASCII file (typically through the snapshot command),
the commands included in the file include syntax indicating the origin of the command. The origin
specifies where the rule, condition, condition group, or action was created, either an LDAP server or the
CLI (from ldap or from cli). For built-in QoS objects, the syntax displays as from blt. For example:
-> policy action A2 from ldap disposition accept
The from option is configurable (for LDAP or CLI only) on the command line; however, it is not recom-
mended that a QoS object's origin be modified. The blt keyword indicates built-in; this keyword cannot be
used on the command line. For information about built-in policies and QoS groups, see
Used" on page
21-26.
page 21-40
OmniSwitch AOS Release 7 Network Configuration Guide
"How Policies Are
March 2011
Advertisement
Table of Contents
