Os basic system 7450 ess series ethernet service switch (537 pages)
Summary of Contents for Alcatel-Lucent OmniSwitch AOS Release 7
Page 1
060322-10 Rev. A December 2010 OmniSwitch AOS Release 7 Transceivers Guide www.alcatel-lucent.com OmniSwitch AOS Release 7 Transceivers Guide December 2010...
About This Guide This OmniSwitch AOS Release 7 Transceivers Guide provides specifications and compatibility informa- tion for the supported OmniSwitch transceivers for all OmniSwitch AOS Release 7 Products. Supported Platforms This information in this guide applies to the following products: •...
Specification Information. Each transceiver has an associated table providing individual specifications for all supported transceivers. Compatibility Information. A compatibility chart is provided for each transceiver specifying which modules or switch the transceiver is supported on. page -vi OmniSwitch AOS Release 7 Transceivers Guide December 2010...
Stage 3: Integrating the Switch Into a Network Pertinent Documentation: OmniSwitch AOS Release 7 Network Configuration Guide OmniSwitch AOS Release 7 Advanced Routing Configuration Guide When you are ready to connect your switch to the network, you will need to learn how the OmniSwitch implements fundamental software features, such as 802.1Q, VLANs, Spanning Tree, and network routing...
Page 8
CLI-to-MIB variable mapping information for all CLI commands supported by the switch. This guide can be consulted anytime during the configuration process to find detailed and specific information on each CLI command. page -viii OmniSwitch AOS Release 7 Transceivers Guide December 2010...
(authenticated VLANs), Quality of Service (QoS), link aggregation, and server load balancing. • OmniSwitch AOS Release 7 Advanced Routing Configuration Guide Includes network configuration procedures and descriptive information on all the software features and protocols included in the advanced routing software package. Chapters cover multicast routing (DVMRP and PIM-SM), Open Shortest Path First (OSPF), and Border Gateway Protocol (BGP).
With 24-hour access to Alcatel-Lucent’s Service and Support web page, you’ll be able to view and update any case (open or closed) that you have reported to Alcatel-Lucent’s technical support, open a new case or access helpful release notes, technical bulletins, and manuals.
“CWDM Gigabit Ethernet Transceivers” on page 1-13. • 10-Gigabit SFP+ Transceivers. See “10-Gigabit SFP+ Transceivers” on page 1-14 • For a transceiver compatibility matrix, see “Transceiver Compatibility Matrix” on page 2-17. OmniSwitch AOS Release 7 Transceivers Guide December 2010 page 1-1...
For information on installing SFPs, refer to the documentation included with the transceiver. This diagram is a representation only; the physical appearance of the actual module may vary slightly. Small Form Factor Pluggable (SFP) page 1-2 OmniSwitch AOS Release 7 Transceivers Guide December 2010...
When inserting a SFP, be sure that the hinged face is closed. Slide the SFP straight into the slot until the module clicks firmly into place. SFP Module SFP - Hinged OmniSwitch AOS Release 7 Transceivers Guide December 2010 page 1-3...
Page 14
Once disengaged, use the clip end of the ejector tool to carefully pull the transceiver straight out and away Ejector from the NI module. Dust Cover SFP - Ejector Button page 1-4 OmniSwitch AOS Release 7 Transceivers Guide December 2010...
-9.5 to -3 dBm Receiver Sensitivity -14.5 dBm ∼ Transmission Distance 10 km Operating Temperature -40 ºC to 85 ºC / 0 ºC to 70 ºC Digital Diagnostic Monitoring Not Supported OmniSwitch AOS Release 7 Transceivers Guide December 2010 page 1-5...
Page 16
Fiber Type Wavelength 1310 nm Optical Power Output 0 to +5 dBm Reciever Sensitivity -22 dBm Transmission Distance ~40 km Operating Temperature -10 ºC to 70 ºC Digital Diagnostic Monitoring Supported page 1-6 OmniSwitch AOS Release 7 Transceivers Guide December 2010...
Page 17
Gigabit SFP Copper Transceiver. Connector Type RJ-45 Standards Supported 802.3z, SFP MSA Connections supported 10/100/1000Base-T Cable Type CAT5, CAT5e, CAT6 ∼ Transmission Distance 100 m Digital Diagnostic Monitoring Not Supported OmniSwitch AOS Release 7 Transceivers Guide December 2010 page 1-7...
Average Power Output -14 to -8 dBm Receiver Sensitivity -32 dBm Transmission Distance ~20 km Operating Temperature 0 ºC to 70 ºC Digital Diagnostic Monitoring Supported Notes Designed for use with SFP-100-BX20LT page 1-8 OmniSwitch AOS Release 7 Transceivers Guide December 2010...
Page 19
Average Power Output -14 to -8 dBm Receiver Sensitivity -32 dBm Transmission Distance ~20 km Operating Temperature 0 ºC to 70 ºC Digital Diagnostic Monitoring Supported Notes Designed for use with SFP-100-BXLC-D OmniSwitch AOS Release 7 Transceivers Guide December 2010 page 1-9...
Page 20
Average Power Output -9 to -3 dBm Receiver Sensitivity -19.5 dBm Transmission Distance ~10 km Operating Temperature 0 ºC to 70 ºC Digital Diagnostic Monitoring Supported Notes Designed for use with SFP-GIG-BX-D page 1-10 OmniSwitch AOS Release 7 Transceivers Guide December 2010...
Wavelength (nm) 1310 nm Optical Power Output -15 to -8 dBm Receiver Sensitivity -34 dBm Transmission Distance ~15 km Operating Temperature 0 ºC to 70 ºC Digital Diagnostic Monitoring Not Supported OmniSwitch AOS Release 7 Transceivers Guide December 2010 page 1-11...
Page 22
Wavelength 1310 nm Optical Power Output -15 to -8 dBm Receiver Sensitivity -34 dBm Transmission Distances ~40 km Operating Temperature 0 ºC to 70 ºC Digital Diagnostic Monitoring Not Supported page 1-12 OmniSwitch AOS Release 7 Transceivers Guide December 2010...
1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 Optical Power Output -2 to +3 dBm Receiver Sensitivity -24 dBm Transmission Distances ~62 km Operating Temperature -5 ºC to 70 ºC Digital Diagnostic Monitoring Not Supported OmniSwitch AOS Release 7 Transceivers Guide December 2010 page 1-13...
Fiber Type Wavelength 1310 nm Optical Power Output -8.2 to 0.5 dBm Receiver Sensitivity -10.3 dBm Transmission Distance ~ 10 km Operating Temperature -5 ºC to 70ºC Digital Diagnostic Monitoring Supported page 1-14 OmniSwitch AOS Release 7 Transceivers Guide December 2010...
Page 25
Fiber Type Wavelength 1310 nm Optical Power Output -4.5 to 1.5dBm Receiver Sensitivity -6.5 dBm Transmission Distance ~ 220 m Operating Temperature -5 ºC to 70ºC Digital Diagnostic Monitoring Supported OmniSwitch AOS Release 7 Transceivers Guide December 2010 page 1-15...
Page 26
10-Gigabit SFP+ Transceivers Small Form-Factor Pluggables (SFP/SFP+) SFP-10G-C 10-Gigabit SFP+ Copper Transceiver. Connector Type Direct Attached Copper Standards Supported 802.3ae Cable Length 3m, 10m Digital Diagnostic Monitoring Not Supported page 1-16 OmniSwitch AOS Release 7 Transceivers Guide December 2010...
The following sections document the transceiver configurations and minimum release required for support on the OmniSwitch. Compatibility specifications in this chapter include: • OmniSwitch 10K . See “OmniSwitch 10K Series Compatibility” on page 2-18 OmniSwitch AOS Release 7 Transceivers Guide December 2010 page 2-17...
7.1.1 7.1.1 SFP-10G-SR Not supported 7.1.1 SFP-10G-LR Not supported 7.1.1 SFP-10G-ER Not supported 7.1.1 SFP-10G-LRM Not supported 7.1.1 SFP-10G-C Not supported 7.1.1 1. Only supports 1000-Mbits when used on OS10K-XNI-U32. page 2-18 OmniSwitch AOS Release 7 Transceivers Guide December 2010...
Page 29
Transceiver Compatibility Matrix OmniSwitch 10K Series Compatibility OmniSwitch AOS Release 7 Transceivers Guide December 2010 page 2-19...
Page 30
OmniSwitch 10K Series Compatibility Transceiver Compatibility Matrix page 2-20 OmniSwitch AOS Release 7 Transceivers Guide December 2010...